FSI B20

Self-propelled Stump Cutter with gasoline engine

Data sheet: FSI B20 UK.pdf

FSI B20 is a compact and balanced stump grinder that can be used to grind down all types of tree stumps.

The pivot joint between the stump grinder and the wheel axle ensures easy and smooth grinding, even under difficult conditions.

The brakes can be applied individually to each wheel, so the machine can easily access the stump even if there are shavings in the way. The individual brakes can also be used to negotiate steps with ease.

FSI B22

Self-propelled stump cutter with 2WD and gasolin engine

Data sheet: FSI B22 UK.pdf

Self-propelled means the user can move the machine with ease, both moving to and from the stump that is to be ground down and especially when moving the machine onto a trailer or lorry after use.

The hydraulically driven wheels provide a top speed of 3 km/h. In contrast to the ST20B, the machine is equipped with a complete hydraulic system with tank, pump and engine.  

The actual stump grinding is executed by making small manual sideways movements of the stump grinder into the stump. It is extremely easy to move the machine sideways, since only the grinding section moves and not the wheels. All sideways and up/down movements are executed manually with both hands on the handlebar. A centrifugal clutch transfers energy from the V-belt drive to the cutting disc.

Using the handlebar, the operator can move the machine, grind down stumps and operate the brakes and pivot joint lock. A safety bar ensures that the operator is safe, since it must be activated when operating the machine and when grinding down a stump.

FSI B28

Self-propelled Stump Cutter with 2WD and gasoline engine

Data sheet: FSI B28 UK.pdf

FSI B28 is for the serious professional user who carries out stump grinding jobs.

 All operations, including travel and stump grinding, are controlled via the integrated control panel. The control panel can be used to engage/disengage the diff lock as well as to adjust the speed of the swing movement.

Safety is a top priority, and the safety handle on the control panel must be enabled to start the grinder head.

FSI D30

Self-propelled Stump Cutter with 2WD and diesel engine

Data sheet: FSI D30 UK.pdf

FSI D30 is for the serious user who uses a stump grinder regularly in their work. The diesel engine provides high performance capacity and excellent operating efficiency.

All operations, including travel and actual stump grinding, are controlled via the integrated control panel. The control panel can be used to engage/disengage the diff lock as well as to adjust the speed of the swing movement.

Safety is a top priority, and the safety handle on the control panel must be enabled to start the grinder head.

FSI D30 TRACK

Stump cutter with Track and diesel engine

Data sheet: FSI D30 TRACK UK.pdf

The new track version increased the terrain capability, and thus transport to stumps that need to be removed has been optimised. Another great benefit is the extreme stability achieved when grinding down a stump because of the high deadweight.

FSI D30 TRACK is equipped with a 30 HP Kubota water-cooled diesel engine and a cutting disc that is 470 mm in diameter. Hydraulic cylinders provide the stump grinder's up/down and sideways movement. The machine is 775 mm in width, and with the belts in the outer position, machine width is 1050 mm. Total weight is 950 kg.

All machine operation, including moving the stump grinder and grinding down stumps is executed via the handlebar, so the operator can stand behind the machine during operation and move towards the work site, and the panel can be turned during stump grinding, providing a good overview of the stump during the stump grinding process. An ergonomic safety bar on the panel functions as a support for the operator's hands and as an emergency stop, since it must be activated when moving the stump grinder and when grinding down stumps. To ensure maximum visibility and use, the machine is equipped with powerful LED work lights.  

Is also availble with remote control . FSI D30 TRACK REMOTE

FSI D30 TRACK REMOTE

FSI D30 TRACK REMOTE
Self-propelled Stump Cutter with radio remote control and Tracks

Data sheet: FSI D30 TRACK REMOTE UK.pdf


The track base increase the terrain capability and bring a high stability during stump grinding because of the high deadweight.
All machine operations for driving and stum cutting is done over the radio remote contol. The radio remote control brings optimal view for driving and stump cutting.

Standard on FSI D30 TRACK REMOTE
• On tracks with hydraulic extension
• Engine with electric startbox and hours meter
• FSI power clutch. Electric-hydraulic clutch system with integrated brakes
• Double hydraulic cylinder for the sweep function
• Speed control on the sweep
• V-belt drive for optimal capacity with a minimum of power loss
• 3 x turnable tooth-system with FSI Holders
• Special designed cutting disc for optimal capacity and durability
• Integrated points for lashing
• Lifting points for handling with crane
• Protection shields behind the cutting wheel
• 90 degr. turnable control panel for optimal view to the cutting area
• Radio remote control
• Extra battery, battery charger and cable
• Integrated toolbox
• LED work light
• Tool set for wearing parts

Options
• Manual box
• Dozer plate rear mounted

FSI D42

NEW

Stump cutter with 42 hk and 4WD

Data sheet: FSI D42 UK.pdf

We have been asked for a while for a compact stump cutter with large capicity and 4WD and now it is here.
The FSI D42 is also available with radio remote control as FSI D42 REMOTE and on tracks as FSI D42 TRACK REMOTE.

4WD and the skid-steer wheels brings you easy towards the stumps and the 42 hp diesel engine together with the 1,7 m  wide cutting range makes the stump cutting to a piece of cake..

The D42 is standard with:

  • Hydraulic drive in 2 speed HI 2WD and LO 4WD
    • HI 2WD traction on the front wheels for driving o roads with speed up to 3,5 km/h
    • LO 4WD 4-wheel drive, double traction force, diff-lock on the front wheels and reduced speed
  • FSI power clutch. Electric-hydraulic clutch system with integrated brakes
  • Skid-steer tires ø450 x 210 for optimal ground control and minimum of pressure
  • LED work light

You will also find the general advantages on the 4 wheels FSI stump cutter on the FSI D42:

  • Double hydraulic cylinder for the sweep function
  • V-belt drive for optimal capacity with a minimum of power loss
  • 3 x turnable teeth-system with FSI holders for minimizing numbers of wearing parts.
  • Integrated points for lashing
  • Lifting points for handling with crane
  • Twin wheels with single centre-bolt for easy mounting
  • 90 degr. turnable control panel for optimal view to the cutting area
  • Al controls in one panel
  • Safety bar. If the operator leaves the control panel the cutting wheel will automatically stop

Optional

Rear dozerplate

 

FSI D42 REMOTE

Stump cutter with radio remote control, 42 hp and 4WD

Data sheet: FSI D42 REMOTE UK.pdf

The radio remote control brings you the best view to the working area. The 4WD and the skid-steer wheels brings you easy towards the stumps and the 42 hp diesel engine together with the 1,7 m  wide cutting range makes the stump cutting to a piece of cake..

The D42 REMOTE is standard with:

  • Hydraulic drive in 2 speed HI 2WD and LO 4WD
    • HI 2WD traction on the front wheels for driving on roads with speed up to 3,5 km/h
    • LO 4WD 4-wheel drive, double traction force and reduced speed
  • FSI power clutch. Electric-hydraulic clutch system with integrated brakes
  • Skid-steer tires ø450 x 210 for optimal ground control and minimum of pressure
  • Electric diff. lock system on the front wheels
  • LED work light

You will also find the general advantages on the 4 wheels FSI stump cutter on the FSI D42 REMOTE:

  • Double hydraulic cylinder for the sweep function
  • V-belt drive for optimal capacity with a minimum of power loss
  • 3 x turnable teeth-system with FSI holders for minimizing numbers of wearing parts.
  • Integrated points for lashing
  • Lifting points for handling with crane
  • Twin wheels with single centre-bolt for easy mounting
  • Complete Radio remote control for all operations
  • Extra battery, battery charger and cabel for the remote control
  • 90 degr. turnable control panel for emergency operation

Optional

Rear dozerplate

FSI D42 TRACK REMOTE

FSI D42 TRACK REMOTE

Data sheet: FSI D42 TRACK REMOTE UK.pdf


High performance self-propelled Stump Cutter on tracks with radio remote control for optimal terrain capability.

The D42 TRACK REMOTE standard includes:
• Hydraulic 2 speed drive
- HI high speed 3,5 km/h for driving on flat ground.
- LO half speed and double up traction force
• Automatic brakes on the tracks
• Hydraulic extension on the tracks + 350 mm
• FSI power clutch. Electric-hydraulic clutch system
with integrated brakes.
• Fast stop of cuttingdisc by declutching/emergency stop
• Double hydraulic cylinder for the swing function
• Adjustable speed on the swing
• V-belt drive for optimal capacity with a minimum of power loss
• 3 x turnable teeth-system with FSI holders
• Special designed cutting wheel
• Hinged protection shields for chips
• Integrated points for lashing
• Lifting points for handling with crane
• Radio remote control for all operations
• Battery charger, extra battery and cable
• 90 degr. turnable control panel for emergency control
• LED work light
• Integrated toolbox
• Tool set for wearing parts

Optional
• Rear Dozer Blade (provides extra cutting depth up to 60 cm)

FSI D74 REMOTE

FSI Stump Cutter with 4WD, radio remote control and 74 hp diesel engine

Data sheet: FSI D74 REMOTE UK.pdf

FSI D74 REMOTE for the professional use where stump cutting forms a major part of their daily life.

The strong 74 hp diesel engine with amazing 300Nm@1500 rpm, the large 720 mm grinding wheel and two-meter sweep all combine to give an incredible capacity.
That, along with the 4-wheel drive and radio remote control, makes the D74 REMOTE your ideal partner for the cutting of tree stumps.

All travel and stump cutting operations are controlled via the radio remote control. A battery charger, spare battery and a cable are included.

The machine is also equipped with:
- Autopilot* swing function for optimum grinding capacity.
- Twin wheels.
- LED work light.

*The autopilot adjusts the swing speed based on the engine load.

Option

Rear dozerplate and extra cutting deept up to 600 mm

FSI H20

Hydraulic Stump Cutter for 30-50 l/min.

Data sheet: FSI H20 UK.pdf

FSI H20 is a stump grinder attachment for excavators, articulated mini loaders or similar machinery.
The recommended excavator size is 2.0 - 2.5 t.

The H20 is attached using a tool grip/coupling and the grinding movement is performed via the controls on the carrying machine.
Includes hydraulic hoses and uncoated top plate to weld on the tool grip.

FSI H20S

Hydraulic Stump Cutter with sweep for 30-50 l/min.

Data sheet: FSI H20S UK.pdf

FSI H20S is a stump grinder attachment with an integrated swing movement for loaders and tool carriers.
The recommended machine size is 1.5 - 2.5 t.

The H20S is attached using a tool grip/coupling. The swing movement is performed using two cylinders controlled either from the electronic control box or connected via an existing joystick.
The machine is equipped with a flange to attach the tool grip. Includes hydraulic hoses.

FSI H20S-5

Hydraulic Stump Cutter with sweep for 30-50 l/min.

Data sheet: FSI H20S-5 UK.pdf

FSI H20S-5 is a stump grinder attachment for loaders and tool carriers where the swing movement is controlled from existing outlets.
This requires the connection of 2 x pressure/return lines and 1 x pressureless return line on the tool carrier.

The H20S-5 is attached using a tool grip/coupling. The swing movement is performed using two cylinders controlled from a double-action outlet.
The machine is equipped with a flange to attach the tool grip. Includes hydraulic hoses.

Brochurer FSI H20S-5 UK.pdf

FSI H40

Hydraulic stump cutter for 50-75 l/min.

Data sheet: FSI H40 UK.pdf

FSI H40 is a stump grinder attachment for excavators, articulated mini loaders or similar machinery.
The recommended excavator size is 3 - 7 t.

The H40 is attached using a tool grip/coupling. The grinding movement is performed via the carrying machine.
Includes hydraulic hoses and uncoated top plate to weld on the tool grip.

FSI H40S 50-75

Hydraulic stump cutter with sweep for 50-75 l/min.

Data sheet: FSI H40S 50-75 UK.pdf

FSI H40S is a stump grinder attachment with an integrated swing movement for loaders and tool carriers.
The recommended machine size is 1.5 - 2.5 t.

The H40S is attached using a tool grip/coupling. The swing movement is performed using two cylinders controlled either from the electronic control box or connected via an existing joystick.
The machine is equipped with a flange to attach the tool grip. Includes hydraulic hoses.

FSI H40S 80-110

Hydraulic stump cutter with sweep for 80-110 l/min.

Data sheet: FSI H40S 80-110 UK.pdf

FSI H40S is a stump grinder attachment with an integrated swing movement for loaders and tool carriers.
The recommended machine size is 1.5 - 2.5 t.

The H40S is attached using a tool grip/coupling. The swing movement is performed using two cylinders controlled either from the electronic control box or connected via an existing joystick.
The machine is equipped with a flange to attach the tool grip. Includes hydraulic hoses.

FSI H52

Hydraulic Stump Cutter for 80-110 l/min.

Data sheet: FSI H52 UK.pdf

FSI H52 is a stump grinder attachment for excavators, articulated mini loaders or similar machinery.
The recommended excavator size is 8 - 14 t.

The H52 is attached using a tool grip/coupling and the grinding movement is performed via the carrying machine.
Includes uncoated top plate to weld on the tool grip.

FSI H65 100-130

Hydraulic Stump Cutter for 100-130 l/min.

Data sheet: FSI H65 100-130 UK.pdf

FSI H65 is a stump grinder attachment for excavators.

The recommended excavator size is 12 - 20 t.

The H65 is attached using a tool grip/coupling and the grinding movement is performed via the excavator.

Includes uncoated top plate to weld on the tool grip.

FSI H65 135-160

Hydraulic Stump Cutter for 135-160 l/min.

Data sheet: FSI H65 135-160 UK.pdf

FSI H65 is a stump grinder attachment for excavators.

The recommended excavator size is 12 - 20 t.

The H65 is attached using a tool grip/coupling and the grinding movement is performed via the excavator.

Includes uncoated top plate to weld on the tool grip.

FSI H65 165-200

Hydraulic Stump Cutter for 165-200 l/min.

Data sheet: FSI H65 165-200 UK.pdf

FSI H65 is a stump grinder attachment for excavators.

The recommended excavator size is 12 - 20 t.

 The H65 is attached using a tool grip/coupling and the grinding movement is performed via the excavator.

 Includes uncoated top plate to weld on the tool grip.

FSI T25

Stump Cutter for PTO 25-55 hp

Data sheet: FSI T25 UK.pdf

FSI T25 is an ideal attachment for smaller tractors and similar machines with a PTO outlet.

The frame and 3-point linkage (cat. 1) ensure stability during grinding.

All movements are controlled via the joystick, the control box also has an option to adjust the speed of the swing movement.

Includes joystick control, PTO shaft and hydraulic top link.

FSI T27

Stump Cutter for PTO 35-80 hp

Data sheet: FSI T27 UK.pdf

FSI T27 is an attachment for tractors and similar machines with a PTO outlet.
The frame and 3-point linkage (cat. 1/2) ensure stability during grinding.

All movements are controlled via the joystick, the control box also has an option to adjust the speed of the swing movement.
Includes joystick control and PTO shaft.

FSI T65

Stump Cutter for PTO 70-120 hp

Data sheet: FSI T65 UK.pdf

FSI T65 is an attachment for tractors and similar machines with a PTO outlet.

The frame and 3-point linkage (cat. 2) ensure stability during grinding.

All movements are controlled via the joystick, the control box also has an option to adjust the speed of the swing movement.

Includes joystick control and PTO shaft.